|
navigation |
| additional
info |
|
letter
of recommendation |
|
|
 |
 |
 |
 |
| some
frames from film the FILM about work of the pump.. |
| 09-12-04 Photo of tests From Korea... |
Hydraulic pump Alternative sours powers. Water pump
without energy
Rise
of water from the river, channel, without extraneous energy. The pumps,
compressors, engines and electrical energy are not required. It is
the pump without the engine, which, does not require(demand) an additional
source of energy, uses only potential of a small dam (difference from
1 meter) or even natural relief of the river. The hydro pump is capable
to force water on height in 10 - 20 times large, than height of a
used dam. Being by the ecologically clean device, the hydro pump in
a complex with wind, solar and water converters of energy is capable
to decide many problems.
The structure of a product is some pipes and two special valves.
The energy of a working pressure of water (any liquid) and effect of hydrodynamics is used at operation of the valve. Water submits on height of a site for irrigation.
Most effectively in hilly district and mountain conditions for farmer sites, zones of gardening of cities and settlements. The hydro pumps of different standard sizes now are used in a number of farms with the purpose of submission of water on not- pour of ground. Effective the application of the hydraulic pump on pouring to system together with rainy by installations is also.
Depending on power "Kopjer" water can move on height up to 50 meters.
"Copjer" does not require complexly maintenance service, except for replacement of the worn out valves (5-10 years).
The hydro pumps can be coupled for increase of capacity and productivity. For example, for irrigate of fields. One large "Kopjer", established at the private (individual) farmer irrigate up to 60 m. of ground, lifting water from the channel on fields.
Hydro pump “ Kopjer” can work in any water with different inclusions (sand, clay, stones, herb, leaves, silt and other pollution) without service.
Hydro pump has effect of automatic self-regulation on change of speed and a water level and does not demand service. Its impact will be more often or less often.
The technology allows to scale hydro pump the big sizes and capacities without change of a design. There are no problems to make “Kopjer” in diameter of an output in 1 meter and more. The photo with diameter of a target pipe 500 mm is applied. Application such hydro pump does not demand construction of the big dams (or gateway) in 5-10 meters or more. It is to do without in height in 1-2 meters and to use additional energy of water from powerful hydro pump for rising of water on required heigh
The structure of a product is some pipes and two special valves.
The energy of a working pressure of water (any liquid) and effect of hydrodynamics is used at operation of the valve. Water submits on height of a site for irrigation.
Most effectively in hilly district and mountain conditions for farmer sites, zones of gardening of cities and settlements. The hydro pumps of different standard sizes now are used in a number of farms with the purpose of submission of water on not- pour of ground. Effective the application of the hydraulic pump on pouring to system together with rainy by installations is also.
Depending on power "Kopjer" water can move on height up to 50 meters.
"Copjer" does not require complexly maintenance service, except for replacement of the worn out valves (5-10 years).
The hydro pumps can be coupled for increase of capacity and productivity. For example, for irrigate of fields. One large "Kopjer", established at the private (individual) farmer irrigate up to 60 m. of ground, lifting water from the channel on fields.
Hydro pump “ Kopjer” can work in any water with different inclusions (sand, clay, stones, herb, leaves, silt and other pollution) without service.
Hydro pump has effect of automatic self-regulation on change of speed and a water level and does not demand service. Its impact will be more often or less often.
The technology allows to scale hydro pump the big sizes and capacities without change of a design. There are no problems to make “Kopjer” in diameter of an output in 1 meter and more. The photo with diameter of a target pipe 500 mm is applied. Application such hydro pump does not demand construction of the big dams (or gateway) in 5-10 meters or more. It is to do without in height in 1-2 meters and to use additional energy of water from powerful hydro pump for rising of water on required heigh
 |
Depending on conditions of an arrangement of a source of a nutritious pressure, it such as and requirements of the consumer, the various circuits of configuration and accommodation on district of hydro pump installation are possible. The hydro pump installation differs from other pumps - directly uses energy of falling water for rise and replaces simultaneously engine and pump.
Models of hydro pumps can carry out functions:
hydroelectric power station for manufacture of the electric power
installation is designed for use of small water-currents (the river, channels, streamlets) and can function in the crude (muddy) water; capacities 1,2 … 5 kWt, a voltage 220V … 380V, number of phases 1 … 3 are stipulated, at charges of water 15 ( 20 ) … .50 ( 80 ) liters\sec and a working pressure 1 ( 1,5 ) …2 ( 2,5) meters. Weight of 80-450 kg, the sizes 480 x 440 x 520 …. 890 x 810 x 1015 (mm).
the compressor for manufacture of compressed air
compressed air (with the help of the special additional device which are not demanding any energy) it is used for cooling special premises(rooms) of the different sizes (+120C …. +30C) where products can be stored, fruit and vegetables or industrial needs. And also for freezing (-30C … .-300C, if necessary) for long storage of food stuffs etc.
the thermal generator for reception of hot water
with the help of the special additional and simple device (not demanding any energy) water received of the hydro pump can be heated up to +950C. Water can be used for heating habitation, premises (rooms), and manufactures, for household and economic needs.
Vein (inhabited) the house or the small farm, located near to water-currents, can be provided with independent sources: hot water, electricity, a heat and a cold. Thus the electricity, gasoline, gas, coal, petroleum, nuclear and thermal power stations are not required additional.
We offer - Sale of the license, the patent, creation of coproduction.. (installation is patented)
